Epoxy Flake System Description
- 100% solids epoxy resinous flooring system
- Colored vinyl chips (flake) broadcasted in wet base coat
- Clear urethane topcoat sealer (UV Stability)
- Decorative, seamless, and low maintenance
- Produces a dense, non-porous, chemical and dirt resistant floor
Our Process (2 days for a typical two car garage)
- Industrial grade mechanical floor prep of concrete substrate
- Pre-Fill cracks and minor divots with epoxy fast cure mixture
- Apply 100% solids epoxy resinous base coat with broadcast colored flakes
- Apply clear urethane topcoat sealer
- Urethane Sealers contain UV Stability preventing discoloration and have excellent chemical, stain, and abrasive resistance
Our recommended wait time after installation:
Foot Traffic: 12 hrs
Vehicle Traffic: 72 hrs
Maintenance Instructions
- Easily cleaned with neutral soaps or detergents (Dawn dish washing detergents)
- When cleaning, use water and a light bristled brush
- Clean up chemical spills immediately to avoid sealer discolorations
Standard Color Chart – Full Broadcast Chip Blend
